Getting Started with the FabLight

After the FabLight arrives at your shop, review these articles to get your machine unpacked, installed, and running with design files you make. New users should also start here to get oriented to the machine.

Unpacking the FabLight
Tools Needed: 3/32" allen key 9/16" wrench 17mm(11/16") wrench Flat-head screwdriver Scissors Instructions: The FabLight crate sh...
Thu, Sep 24, 2020 at 2:56 PM
FabLight Work Flow
In order to run an application on the machine, you must create design files to bring to the FabLight. Below is a birds-eye view of how to get from your Soli...
Fri, Jun 21, 2019 at 10:35 AM
How to Get a Freshdesk Account
3D Fab Light uses Freshdesk as both our Knowledge Base and Service Ticketing platform. There are two levels of Freshdesk access - public for basic users and...
Mon, Nov 23, 2020 at 10:27 AM
Tube Extension Box Installation
About the Tube Extension Box The BBQ extension is an optional feature you can order for your FabLight to help load tubes longer than the default 52” length...
Thu, Dec 26, 2019 at 1:34 PM
Adding New Materials to your Database
Below are excerpts from page 20 of the FabCreator v3.0 manual, and pages 34-35 of the FabLight Operator manual v3.0, that outline the basic workflow of addi...
Tue, Oct 29, 2019 at 12:54 PM