The FabLight has minimal "consumable" parts.
We recommend you keep the following parts on hand:
| Name | Description | Ordering Instructions |
|---|---|---|
| Laser window | Optical window in the cutting head that protects the focus optics from contamination | OPTION 1) Order directly from Thorlabs. ThorLabs WG41050-C window: https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=3983&pn=WG41050-C#5329 OPTION 2) Order through FabLight's online store: http://service.3dfablight.com/ |
| Nozzle tip | Copper nozzle tip on the cutting head with 1.5mm aperture | OPTION 1) Order directly from Laser Mech. Double Nozzle 1.5mm PLGJT0257 http://www.lasermech-rps.com/cincinnati.asp?Section=Nozzles OPTION 2) Order through FabLight's online store: http://service.3dfablight.com/ |
| Nozzle ground cable | Cable connecting the nozzle to the cutting head, acts as a grounding cable | Order through FabLight's online store. http://service.3dfablight.com/ |
Ordering through 3D Fab Light
We’re excited to announce our new 3D FabLight Service site, where you can easily purchase nozzles, windows, filters, and other parts you need to keep your machines running smoothly. With a wide selection of products, our store is the only place to find authorized service parts for your FabLight. Instructions here: How to Create an Account for the 3D FabLight Service Store
Other recommended supplies
| Name | Description |
|---|---|
| Scotch brite | Green scotch brite to gently clean the copper nozzle tip |
| Disposable gloves | For changing the optical window |
| Shop towels | Used to clean the machine as part of the PM schedule |
| WD-40 | WD-40 is also lightly applied to the rails after they are cleaned |